威尼斯app官方(中国)有限公司

威尼斯app官方 > 产品中心 > 环保检测 > 气体检测仪 > 船舶工业氧气分析仪

船舶工业氧气分析仪

简要描述:船舶工业氧气分析仪是一款结构简单、操作方便、性能可靠的烟气监测设备,其的测量效果和耐用的特性深受用户喜爱。

  • 产品型号:
  • 厂商性质:经销商
  • 更新时间:2021-07-02
  • 访  问  量:1130
产品详情

船舶工业氧气分析仪特征:

Small, Lightweight and Inexpensive

The Argweld PurgEye® 300 Nano Weld Purge Monitor® is small, lightweight and inexpensive.

The PurgEye® 300 Nano is equipped with an integrally mounted sensor to eliminate electrical interference.

The PurgEye® 300 Nano is specifically developed for weld purging of critical stainless steel and titanium joints and others where data logging, alarms and welder control are not necessarily required.

The PurgEye® 300 Nano is perfect for operation with manual welding, orbital welders, welding enclosures, pipe welding, chamber welding, duplex steel and titanium welding and ideal for welding stainless steel in ultra clean applications.

The PurgEye® 300 Nano has secure 'leak tight' connectors for weld purge hoses. Also, the instrument can be used with optional accessory hand pump and gas sampling probe.

The PurgEye® 300 Nano has low repair, refurbishment and re-calibration costs. There is no pump needed and hence there are no moving parts to fail.

船舶工业氧气分析仪总体描述:

Purpose-designed Purge Monitor

The Argweld® PurgEye® 300 'Nano' Weld Purge Monitor® has been specifically designed as a very low cost, basic entry level version of the Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld purging down to 10 ppm.

With a large alpha-numeric display, the Argweld® PurgEye® 300 'Nano' measures very accuray from 1000 ppm down to 10 ppm.

The Argweld® PurgEye® 300 'Nano' uses a unique new low cost long life sensor which has very little maintenance requirement and avoids the disadvantages of monitors with 'wet cell' technology that have to be constantly calibrated and have sensors replaced.

Argweld® PurgEye® 300 'Nano' Weld Purge Monitors® are available for immediate delivery.

技术参数:

Argweld® PurgEye® 300 Nano Weld Purge Monitor® Accuracy Range

Measuring Range:

1,000 ppm down to 10 ppm

Accuracy:

±2.0% of scale reading

Size:

145 x 190 x 70 mm

Power Consumption:

18 W

Operating Voltage:

AC 115/230 V single phase 50/60 Hz

Weight:

1.5 kg

The PurgEye® 300 Nano has an operating voltage of AC 115/230 V single phase 50/60Hz. The unit uses an external 12 V Power Supply Unit with an input voltage range of AC 90 to 260 V (included).

The PurgEye® 300 Nano has a large alpha-numeric display.

Display readings can only be shown in ppm.

The PurgEye® 300 Nano has a warm up time of less than 60 seconds.

Supplied with:

External 12 V Power Supply Unit (including multiple international mains adaptor connections)
Sample tube set (40 cm red tubing and 1 metre green tubing)
User instruction booklet
Storage and presentation case
Calibration Certificate for the purpose of Quality Control Procedures and Management Systems

便携式测氧仪//氧气含量检测仪PurgEye 300 Nano/APIO 300N使用说明:

接通电源插头即为开机。

待显示器中显示为1000并闪烁时(大约10分钟左右),表示机器已经热机完成,可以使用。

分别把探针头及排气管插入机器的2个孔中。(上下孔没有规定顺序)。

把探针头插入带检测管道的焊缝中即可检测。

电源插头拔掉即为关机。

便携式测氧仪//氧气含量检测仪PurgEye 300 Nano/APIO 300N其他规格:

Shipping Information, Weights and Dimensions

Product Codes and Sizes

Dimensions 145 x 190 x 70 mm
Gross weight 2.0 kg
Nett weight 1.5 kg
Volumetric weight 2.1 kg

Actual Instrument dimensions 145 x 190 x 70 mm
Actual Instrument weight 1.5 kg

Storage carry case dimensions  377 x 322 x 95 mm

更多PurgEye 300 Nano/APIO 300N讯息请。

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
产品中心
相关文章

威尼斯app官方|威尼斯app官方

XML 地图 | Sitemap 地图